Blog
Notes from the inventory desk
Field notes: the acquisition where the cruise and the canopy model were twelve feet apartA look at why a forester's cruise and a stereo-derived canopy height model can land twelve feet apart on the same stand, and what that gap means.
How many ground control points does a stereo satellite pass need?How many ground control points a stereo satellite pass needs, and where to put them, for a canopy surface model you can trust for volume work.
How to detect harvest removals between annual canopy height passesA field method for spotting unauthorized harvest and verifying cut blocks by differencing canopy height model passes year over year.
What timber depletion is, and how a standing volume refresh feeds itTimber depletion ties directly to standing volume. A stale cruise skews the depletion rate per unit and the numbers that follow it.
Field notes: the week the stereo pass caught a property line nobody had walked in a decadeA routine canopy surface model turned up something else: a fence line that didn't match the deed, a decade after anyone last walked it.
Leaf-on vs leaf-off imagery for canopy height mapping in mixed hardwood standsWhy leaf-on and leaf-off stereo imagery give different canopy surfaces in mixed hardwood stands, and how to pick a flying window for standing volume.
Board feet vs cubic volume: which one your appraisal usesBoard feet and cubic volume measure different things in a timberland appraisal. Here's which unit your report needs, and why.
Mean top height vs dominant height: picking the right input for a volume regressionHow mean top height and dominant height differ, and which one to pull from a canopy surface model when fitting a stand volume regression.
Field notes: the flight that caught a blowdown before the cruise crew didA storm-damaged compartment turned up in an annual canopy height refresh before the ground cruise crew ever walked it. Field notes on why that matters.
What is an area-based approach in forest inventory?A plain explainer on area-based forest inventory (ABA): how it works, how it differs from individual tree detection, and where it fits in a cruise cycle.
Site index curves, explained for timberland valuationWhat a site index curve measures, how base age and site class feed a timberland appraisal, and where it falls short of a current volume read.
What crown closure tells you that stem counts don'tCrown closure percentage vs. stems-per-acre: why a stocking assessment built on stem counts alone can miss what the canopy is doing.
How often should a timberland REIT refresh its volume estimate?Cruise cycles are long. 10-K filings aren't. Here's how timberland REITs think about refresh cadence for standing volume between inventories.
Merchantable volume vs. standing volume: what's the difference?Standing volume counts every cubic foot on the stem. Merchantable volume counts what clears utilization standards. Here's how each gets used.
DSM vs DTM in forestry: what each model shows youDSM vs DTM in forestry explained: what a surface model captures, what a bare earth model strips away, and how the two combine into canopy height.
How many stereo passes does a canopy height model actually need?Overlap percentage and pair count for VHR stereo canopy height work, and why forested terrain needs more redundancy than bare-earth mapping.
Optical stereo vs LiDAR for canopy height modelsHow stereo photogrammetry and LiDAR each build a canopy height model, and why timberland and carbon teams pick one for annual volume tracking.
What resolution imagery resolves individual tree crowns?Sub-meter GSD is the threshold for crown delineation in forestry. What that means for your stand inventory and carbon project area.